【2020年6月26日発売】
S209及びWRX S4 STI Sport#に採用されたトランクルーム内上部に装着するフレキシブルドロースティフナーです。左右Cピラーの根本部分を繋ぎ、テンションを掛けることで車体後部のねじれを適度に抑制し、リヤの追従性を高めることにより、ハンドリングのレスポンス向上とともに操縦安定性が向上します。
別売りの「ガードバー(フレキシブルドロースティフナーリヤ)」と合わせてお使いいただくことで、トランクルーム内への荷物の積み込み時や走行中の急制動時など、積荷がフレキシブルドロースティフナー リヤへ接触することによる変形や破損を防ぐことができます。
Introduced for the S209 and WRX S4 STI Sport#, this is a Flexible Draw Stiffener mounted in the upper part of the trunk. It connects the root parts of the right and left C pillars to apply tension, which moderately suppresses the torsion in the rear of the car body. This results in enhanced following abilities in the rear which improve the response to handling as well as handling stability.
By using this product in combination with the separately available Guard Bar (for Flexible Draw Stiffener Rear), deformation or damage to the Flexible Draw Stiffener Rear due to contact from baggage when loading it into the trunk or in the case of hard braking while driving, can be prevented.
※ 掲載されている価格は工賃を除くメーカー希望小売価格です。
※ トランクルーム内上部に装着することにより、トランクルーム内のスペースが狭くなります。
荷物の積載に影響する場合がありますので、予めご了承ください
※ 装着に際し、トランクルーム内トリムパネル(内装)の加工が必要となります。
※ 別売り(2020年7月発売予定)のガードバーと同時装着することにより、荷物との接触等による変形や破損を防ぐことができます。
* The price shown is a suggested retail price and does not include installation fees.
* Please note that the loading of baggage may be affected as the space of the inside of the trunk is reduced when this product is attached in the upper part.
* Processing of the trim panel (interior) in the trunk will be required to fit this product.
* Fitting together with the separately sold Guard Bar (to be released in July 2020) will prevent deformation or damage to this product caused by contact with baggage.