COIL SPRING F LEGACY B4(BL)

  • COIL SPRING F

    The image is for illustrative purposes only.

COIL SPRING F
Part number: ST2033021000
* Part numbers differ depending on the country.
This reinforced coil spring provides improved roll rigidity through increased spring rate and stable control due to a low center of gravity. It achieves a balance between riding comfort and driving performance, with a slightly higher spring rate of 39 N/mm in the front and 59 N/mm in the rear. The difference in height is approximately -15 mm both in the front and rear. Three types of springs are available for both front and rear. This allows optimal performance for each model, through various combinations based on differences in weight distribution.
* The part number is for one spring (1 piece), need 2 pieces for both sides.
* These coil springs are for compatible models only.
* For standard front struts.
* They cannot be used with models other than compatible models, due to differences in car weight that could result in imbalance in car height from front to rear.
* Car height is reduced approximately 15 mm from the standard height (when the car is empty). However, the change in car height might fluctuate according to accessories installed and individual differences in car bodies and parts.
* Coil springs cannot be installed on a 2.0GT customized edition without the Bilstein struts due to the different shape of the spring seat.
Please consult with your local SUBARU dealership or an authorized SUBARU distributor to confirm the compatibility of the parts available on this website.