NEWS
YOUTUBE
INSTAGRAM
COIL SPRING FORESTER(SJ)
The image is for illustrative purposes only.
Part number: ST20330SF010
Part number: ST20380SF010
* Part numbers differ depending on the country.
Part number: ST20380SF010
* Part numbers differ depending on the country.
The specifications for this product are based on repeated and thorough driving tests, to achieve the best match with standard genuine damper. The center of gravity has been lowered without compromising passenger comfort, whereas the design and structure of the product ensure high driving stability. The vehicle height is 15 mm lower compared to standard models to reduce roll and give the FORESTER model a more sporty look.
* Please be aware that each vehicle requires two units in both the front and the rear.
* These coil springs are for compatible models only.
* For standard front struts.
* If they are installed on a different model, it may upset the front/rear balance. Do not install on a non-compatible model.
* Vehicle height is reduced by approximately 15 mm from the standard height (when the car is empty). However, the change in car height might vary depending on optional accessories installed and individual differences in car bodies and parts.
* These coil springs are for compatible models only.
* For standard front struts.
* If they are installed on a different model, it may upset the front/rear balance. Do not install on a non-compatible model.
* Vehicle height is reduced by approximately 15 mm from the standard height (when the car is empty). However, the change in car height might vary depending on optional accessories installed and individual differences in car bodies and parts.
Please consult with your local SUBARU dealership or an authorized SUBARU distributor to confirm the compatibility of the parts available on this website.
